RIPO Freezer

Product code: FDFreezer

  • Sliding or opening
  • Operates down to -45 'C
  • Heated doorframe
  • 0,8 mm stainless steel or 0,75 mm coated steel


The freezer sliding doors are intended for the rooms with the negative temperatures ranging from -45 to -5 degrees Celsius.

Due to the conditions of the rooms and wall constructions, the various designs of heated doorframes are used. There are also available two precise sliding rails, ensuring the smooth operation of the doors for many years. The standard freezer doors are equipped with the heated doorframe and thermostat, protecting the heaters from damage, while the freezer is not operating. Additionally, the heated thresholds or heated lower parts of the door panels (in connection with the heating mats in the flooring) are used as in order to protect the lower part of the doors against freezing.

Door panel:

Made of 0,8 mm stainless steel or 0,75 mm coated steel.

The thickness depends on the temperature in the room:

100 mm - temp. up to -25 degrees Celsius

120 mm - temp. up to -35 degrees Celsius

150 mm - temp. up to -45 degrees Celsius

The door panels are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!

The door panels can be produced in 3 variants:

a) standard variant - one-piece envelope structure

b) large-size doors - two- or multi-piece envelope structure

c) door panels made of sandwich panels in the stainless steel doorframes (this is the most-cost effective but least hygienic solution)

The door panels of envelope structure are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!

Sealing:

The two-component rubber seal in a special profile around the perimeter of the door. This solution eliminates the thermal bridge of the door panels. The lower part of the seal is hard and ensures a solid fit. The upper part is soft, adjoins the doorframe, ensuring a good tightness and light work of the door. The door bottom is sealed by a durable, full rubber seal. The door can be equipped with a threshold flush with the floor level or without threshold.

Stainless steel:

Probably, as the only producer of the specialist doors, we spot steel on our own (round and strip spotting). Thus, our customers can freely select doors that most correspond to their tastes.

Sliding rail: Classical, stainless steel rail with cover or stainless steel pipe rail

Latches (option): Classical lock, safe lock, reverse-operation lock

Door pusher: Combined pusher outside and inside, as a standard